GL iNet GL MT3000 Setup Using Web Step By Step

GL iNet GL MT3000 is a compact device which is popular for travelling. You can use this device to get a stable network. The device has the capacity to offer high speed internet up to 2976 Mbps through both the frequencies. This dual frequency device is also known as Beryl AX. Configuring Beryl AX is not a formidable task if you are aware of the setup process. 

For all those who are new to networking, we are here with the step by step guide to perform GL iNet GL MT3000 Setup using the web interface. Read out the detailed steps from the further section and configure your MT3000 device by your own self. 

Power Up The Beryl AX

Boot up the Beryl AX device using the power adapter you got along with the device. You have to turn on the power switch and wait for the booting to complete. As the bootup completes, the device LED’s get stabilize. Step further to pursue the GL iNet GL MT3000 Setup.

Connect To Beryl AX

Connecting the beryl AX with the client device is an important step of the setting up process. To perform this step you can opt any of the below specified methods:

Wired Based Connection

Ethernet cord is required for the wired connection with beryl AX. Using the cord you can easily join your computer/ laptop device with the Beryl AX. inject ethernet cord into the computer/ laptop’s ethernet port and in the router. Verify the connection is done perfectly on your client device.

Wireless Connection

Wireless connection with beryl AX is a simple method of connection. Using this method you can connect  smartphone, tablet, computer and laptop with the beryl AX. For connection you need to check the device label to know the default SSID of the beryl AX router. Open the wifi settings in your client device to establish the connection using Goodlife as default password. 

Launch Web Browser

Launching the web browser is the next step. You can use either google chrome, mozilla firefox, safari or any other browser.

Access Web Interface

Move ahead, complete the GL iNet GL MT3000 Setup, you have to enter the default IP in the URL bar of the browser you just launched. As the page appears you can proceed with the setup steps as screen guided. 

Connect To Internet

Moving further, go to the settings and look for an internet option. Choose a way to connect your Beryl AX with the internet and complete the configuration. End up the process by submitting your changes. 

Test Network

Lastly, you have to run a speed test. Speed test is needed to verify that the router’s network is working properly and offering high speed internet or not. 

Conclusion

Lastly i would like to conclude that the GL iNet GL MT3000 Setup process is very simple with the above specified breakdown. You can configure the device by following the process. In case you face any problem in