A Complete GL iNet GL E750V2 Setup Guide

A Complete GL iNet GL E750V2 Setup Guide

  • May, Tue, 2025

GL iNet’s E750V2 is a travel friendly and compact router which is compatible with global carriers. It is also known by the name of Mudi V2. It operates on GL.iNet’s SDK 4.0 in addition to OpenWrt. So to make the best possible use of this travel router, its accurate configuration is extremely important. So in this blog post we’ll be sharing complete insights about GL iNet GL E750V2 setup. The post will cover product features, easy step by step setup instructions as well as list of package contents. 

Product Features 

The GL iNet GL E750V2 travel router operates on dual frequency bands. It supports speeds of 300Mbps on the 2.4Ghz band. In addition to it users get to fetch speeds of 433 Mbps on the 5Ghz frequency band. Further the device features a powerful battery. It is 7000mAh. The best part is that GL iNet GL E750V2 setup supports multi-WAN. This ensures smooth as well as uninterrupted connection for each device. 

GL iNet GL E750V2 Hardware Overview 

First of all it is a mini router. On its front panel, there is an OLED display of 0.96 inch. On one side panel, there is a power button. Whereas on the other side you get the button for mode switching. Now moving towards the bottom panel there is a power/ethernet port in addition to USB 2.0 port. Lastly, from the back side when you release the tray, you’ll find a Nano SIM card slot, beside it is a reset button and MicroSD card slot. 

Package Contents

The GL iNet GL E750V2 setup box contains following components:

  • Mudi V2 Compact 4G LTE Travel Router. 
  • Next up, comes the power adapter.
  • Four different converter plugs.
  • Thereafter comes an ethernet cable.
  • A USB-C port replicator.
  • One USB C to C wire.
  • One USB A to C wire.
  • One carry pouch for the router.
  • Lastly, a quick GL iNet GL E750V2 setup manual alongside thankyou and warranty card. 

Setup Guidance 

First up, users who want to use a SIM card should insert it before turning on the Mudi V2. To insert the same follow this easy step:

 

  • From the backside move the lid and take it upwards. Insert the SIM card into the right port and close it down.

✓ Power ON

Now to turn on the Mudi V2 you need to push the power button and keep hold on it for three seconds. Whereas if the battery is not there, then you can make use of a 5V/2A adapter for turning on the travel router. 

✓ Connect 

Moving further, fetch a smart device. It  can be a laptop, computer system, iPad or even a cell phone will work. Turn on its wifi. Select identity: GL-E750V2- XXX. Put up a password. It is “goodlife”. Tap on Connect.

✓ Complete GL iNet GL E750V2 Setup 

For configuration, open an internet browser like chrome, internet explorer, firefox, safari or edge. Move to the address field. Type in http://192.168.8.1. Press Enter. Thereafter select language. Click Next. Setup password, confirm it, tap on Submit. Finally, connect to the Internet by selecting any method which are:

  • Ethernet 
  • Repeater
  • Tethering 
  • And last one is Cellular.