GL iNet router setup

GL iNet Router: Setup And Troubleshooting Guide

  • May, Thu, 2025

Routers are a major part of every space be it home or work space. When it comes to routers, especially the travel ones, none comes close to GL iNet. So if you also got one for yourself then here is the easy step by step GL iNet Router setup guidance. Moreover, no matter how costly or reliable the networking device is, it tends to show up problems here and there. So after the setup process, the blog-post will also cover major points relating to GL iNet router troubleshooting. 

GL iNet Router Setup

The setup is simple. The requirements for it are also basic. Here is the list for the same:

  • GL iNet router with its power adapter.
  • An Ethernet cable.
  • A power socket that offers consistent electricity.
  • Thereafter, a wifi enabled smart device.
  • Lastly, for gathering default information, you need access to the installation manual. 

Quick Setup Steps

  1. Move the given adapter into the router. Then attach it to the electrical outlet. Switch it on. 
  1. This GL iNet router setup step is crucial, so perform it with precision. For the same, fetch the smart gadget. Move to the wireless settings. From here, activate the wifi. Tap on the wireless network identity as you see on the GL iNet router’s product label. Input the password. Tap Connect.
  2. Many users find the above connection method a little tedious. So for them, using the ethernet cable is the simple way to collaborate the host device and the GL iNet device together. 
  3. After that, open up an internet browser. Head to the address field. Enter 192.168.8.1. Click Enter. 
  4. Herein choose the language. Tap Apply. Thereafter, create an admin password. Once done, tap on Apply.
  5. Lastly, make a move towards the Internet option. Select any one connection method. Complete the GL iNet router setup process, by fulfilling the on-screen guiding steps. 

GL iNet Router Troubleshooting Guide

Here are the solutions for most common issues:

✓ No Internet Access 

First up, if after setup, you do not get access to the internet then consider these troubleshooting steps:

  • Check whether the router is attached rightly to the upstream device or not. 
  • Restart both the modem and router. For this follow three simple steps that are: unplug, hold on for 60 seconds, replug. 
  • Thereafter, verify that your selected connection method (Repeater, Tethering, or Cable) is correctly configured.

✓ Admin Page Not Loading 

  • First make sure the device is connected to the right router’s network.
  • Next up, the chosen browser should be compatible. You can use internet explorer, chrome, firefox, safari as well as edge. 
  • Use the default IP address without any typos or extra space. The correct address is 192.168.8.1. 
  • Additionally, clear your browser’s cache and ensure its operation on recent firmware versions. 

✓ Frequent Disconnections

  • To solve the sudden disconnection issue upgrade the firmware via 192.168.8.1. Pending updates not only creates security issues but also affects the overall performance of your networking device. 
  • Also, check for overheating. If the scenario is such then withdraw the electrical supply from the router till it reverts back to the room temperature. 
  • Next up look for the placement issues. Avoid keeping it near metallic surfaces and also close to electrical objects.

By following the GL iNet router troubleshooting steps outlined above, you can resolve most connectivity and configuration issues. But sometimes the issue is so complex that it requires  hard reset. So then follow these factory resetting steps:

  • Turn on the router.
  • Locate the reset button. 
  • Push it down. 
  • Hold it for seven to eight seconds.
  • Release it. 

This brings the device to its original settings. Therefore the issue is eradicated.